Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Halides acid esters

Metallic sodium. This metal is employed for the drying of ethers and of saturated and aromatic hydrocarbons. The bulk of the water should first be removed from the liquid or solution by a preliminary drying with anhydrous calcium chloride or magnesium sulphate. Sodium is most effective in the form of fine wire, which is forced directly into the liquid by means of a sodium press (see under Ether, Section II,47,i) a large surface is thus presented to the liquid. It cannot be used for any compound with which it reacts or which is affected by alkalis or is easily subject to reduction (due to the hydrogen evolved during the dehydration), viz., alcohols, acids, esters, organic halides, ketones, aldehydes, and some amines. [Pg.143]

Strictly speaking the alkyl halides are esters of the halogen acids, but since they enter into many reactions (t.g., formation of Grignard reagents, reaction with potassium cyanide to yield nitriles, etc.) which cannot be brought about by the other eaters, the alkyl halides are usually distinguished from the esters of the other inorganic acids. The preparation of a number of these is described below. [Pg.302]

Most of the known acylations have been described for 2-aminothiazoles, the activity of the acylating agent being in the order, acid halides > anhydrides > esters > acids — amides. [Pg.47]

Thiazolecarboxylic acid hydrazides are prepared by the same general methods used to prepare amides, that is, by treating acids, esters, amides, anhydrides, or acid halides with hydrazine or substitued hydrazines. For example, see Scheme 21 (92). The dihydrazides are obtained in the same way (88). With diethyl 2-chloro-4,5-thiazoledicarboxylate this reaction gives the mono hydr azide monoester of 2-hydrazine-4,5-... [Pg.530]

Carboxylic acid hydiazides are prepared from aqueous hydrazine and tfie carboxylic acid, ester, amide, anhydride, or halide. The reaction usually goes poody with the free acid. Esters are generally satisfactory. Acyl halides are particularly reactive, even at room temperature, and form the diacyl derivatives (22), which easily undergo thermal dehydration to 1,3,4-oxadiazoles (23). Diesters give dihydtazides (24) and polyesters such as polyacrylates yield a polyhydrazide (25). The chemistry of carboxyhc hydrazides has been reviewed (83,84). [Pg.280]

Reaction with Alkyl Halide. The active methylene group of an Al-acylamino-malonic acid ester or Ai-acylamino cyanoacetic acid ester condenses readily with primary alkyl hahdes. [Pg.277]

From Boron Halides. Using boron haUdes is not economically desirable because boron haUdes are made from boric acid. However, this method does provide a convenient laboratory synthesis of boric acid esters. The esterification of boron haUdes with alcohol is analogous to the classical conversion of carboxyUc acid haUdes to carboxyUc esters. Simple mixing of the reactants at room temperature or below ia a solvent such as methylene chloride, chloroform, pentane, etc, yields hydrogen haUde and the borate ia high yield. [Pg.215]

Amongst heat stabilisers are copper salts, phosphoric acid esters,phenyl-3-naphthylamine, mercaptobenzothiazole and mercaptobenzimidazole. Of these, copper salts in conjunction with halides have been found particularly effective, and some automotive specifications require the use of copper for heat stabilisation. Light stabilisers include carbon black and various phenolic materials. [Pg.497]

The reaction between perfluoraarylmagnesium halides and esters of dicar-boxyltc acids gives, besides the expected keto esters, secondary alcohols as reduction products [29, 30, 31] (equation 10) Such a reduction is enhanced by higher temperature The hydrogen necessary for reduction comes from the solvent, diethyl ether, which is dehydrogenated to ethyl vinyl ether, which has been identified as a by-product in a similar reaction of perfluoroalkyllithium compound [52]... [Pg.649]

The Arbuzov reaction,also called the Michaelis-Arbuzov reaction, allows for the synthesis of pentavalent alkyl phosphoric acid esters 4 from trivalent phosphoric acid esters 1 (Z,Z = R,OR) by treatment with alkyl halides 2. [Pg.14]

The reaction mechanism outlined below for phosphorous acid esters analogously applies for the other two cases. The first step is the addition of the alkyl halide 2 to the phosphite 1 to give a phosphonium salt 3 ... [Pg.15]

Closely related to the carboxylic acids and nitriles discussed in the previous chapter are the carboxylic acid derivatives, compounds in which an acyl group is bonded to an electronegative atom or substituent that can net as a leaving group in a substitution reaction. Many kinds of acid derivatives are known, but we ll be concerned primarily with four of the more common ones acid halides, acid anhydrides, esters, and amides. Esters and amides are common in both laboratory and biological chemistry, while acid halides and acid anhydrides are used only in the laboratory. Thioesters and acyl phosphates are encountered primarily in biological chemistry. Note the structural similarity between acid anhydrides and acy) phosphates. [Pg.785]

Conversion of Acid Halides into Esters Alcoholysis Acid chlorides react with alcohols to yield esters in a process analogous to their reaction with water to yield acids. In fact, this reaction is probably the most common method for preparing esters in the laboratory. As with hydrolysis, alcoholysis reactions are usually carried out in the presence of pyridine or NaOH to react with the HC1 formed. [Pg.802]

Carboxylic acids can be transformed into a variety of carboxylic acid derivatives in which the carboxyl -OH group has been replaced by another substituent. Acid halides, acid anhydrides, esters, and amides arc the most common such derivatives in the laboratory thioesters and acyl phosphates are common in biological molecules. [Pg.825]

The reactivity of an acid derivative toward substitution depends both on the steric environment near the carbonyl group and on the electronic nature of the substituent, Y. The reactivity order is acid halide > acid anhydride > thioester > ester > amide. [Pg.826]

In the course of this study, the authors determined /Lvalues for dibenzyl, methyl phenyl, methyl p-nitrophenyl, di-p-tolyl, di-isopropyl and tetramethylene sulphoxides and for diethyl, dipropyl and dibutyl sulphites. The /Lscales are applied to the various reactions or the spectral measurements. The /Lscales have been divided into either family-dependent (FD) types, which means two or more compounds can share the same /Lscale, family-independent (FI) types. Consequently, a variety of /Lscales are now available for various families of the bases, including 29 aldehydes and ketones, 17 carboxylic amides and ureas, 14 carboxylic acids esters, 4 acyl halides, 5 nitriles, 10 ethers, 16 phosphine oxides, 12 sulphinyl compounds, 15 pyridines and pyrimidines, 16 sp3 hybridized amines and 10 alcohols. The enthalpies of formation of the hydrogen bond of 4-fluorophenol with both sulphoxides and phosphine oxides and related derivatives fit the empirical equation 18, where the standard deviation is y = 0.983. Several averaged scales are shown in Table 1588. [Pg.559]

Dialkyl phosphites react with acyl halides such as lauroyl chloride to yield surface-active acid esters of acylphosphonic acid [84-87] see Eq. (40). [Pg.569]

Phosphonous acid diesters undergo the Arbusov reaction with a wide variety of organic halides, giving esters of secondary phosphinic acids, as is demonstrated in Eq. (88) ... [Pg.584]

Note The conversion of a quinoxahnecarboxyhc acid into a quinoxalinecarbox-amide is usually done indirectly via the corresponding acyl halide or ester. However, the direct conversion of an acid or anhydride into an amide is possible. [Pg.325]

Formation of Alkyl Halides from Esters of Sulfuric and Sulfonic Acids... [Pg.518]

Similar additions have been successfully carried out with carboxylic acids, anhydrides, acyl halides, carboxylic esters, nitriles, and other types of compounds. These reactions are not successful when the alkene contains electron-withdrawing groups such as halo or carbonyl groups. A free-radical initiator is required, usually peroxides or UV light. The mechanism is illustrated for aldehydes but is similar for the other compounds ... [Pg.1034]

Section Title Alkyne-Alkyne Carboxylic acid-Alcohol Ether-Alkene Halide-Halide Halide-Halide Alcohol-Ester Alcohol-Ester Ester-Alkene Ester-Alkene Alcohol-Ether Alcohol-Oxide... [Pg.18]

C-Alkylation of malonic acid esters Malonic acid esters, alkyl halides... [Pg.146]

Olefination Reactions Involving Phosphonate Anions. An important complement to the Wittig reaction involves the reaction of phosphonate carbanions with carbonyl compounds 253 The alkylphosphonic acid esters are made by the reaction of an alkyl halide, preferably primary, with a phosphite ester. Phosphonate carbanions are generated by treating alkylphosphonate esters with a base such as sodium hydride, n-butyllithium, or sodium ethoxide. Alumina coated with KF or KOH has also found use as the base.254... [Pg.164]

The palladium-catalyzed carbonylation of aryl halides in the presence of various nucleophiles is a convenient method for synthesizing various aromatic carbonyl compounds (e.g., acids, esters, amides, thioesters, aldehydes, and ketones). Aromatic acids bearing different aromatic fragments and having various substituents on the benzene ring have been prepared from aryl iodides at room temperature under 1 atm... [Pg.184]

The most important derivatives of the amino acids are halides and esters. The most reactive are the halides, which, as described by Emil Fischer, can be obtained by shaking dry amino acids with phosphorus pentachloride in acetyl chloride. [Pg.127]

Hydroxycarbonylation and alkoxycarbonylation of alkenes catalyzed by metal catalyst have been studied for the synthesis of acids, esters, and related derivatives. Palladium systems in particular have been popular and their use in hydroxycarbonylation and alkoxycarbonylation reactions has been reviewed.625,626 The catalysts were mainly designed for the carbonylation of alkenes in the presence of alcohols in order to prepare carboxylic esters, but they also work well for synthesizing carboxylic acids or anhydrides.137 627 They have also been used as catalysts in many other carbonyl-based processes that are of interest to industry. The hydroxycarbonylation of butadiene, the dicarboxylation of alkenes, the carbonylation of alkenes, the carbonylation of benzyl- and aryl-halide compounds, and oxidative carbonylations have been reviewed.6 8 The Pd-catalyzed hydroxycarbonylation of alkenes has attracted considerable interest in recent years as a way of obtaining carboxylic acids. In general, in acidic media, palladium salts in the presence of mono- or bidentate phosphines afford a mixture of linear and branched acids (see Scheme 9). [Pg.188]


See other pages where Halides acid esters is mentioned: [Pg.272]    [Pg.66]    [Pg.81]    [Pg.224]    [Pg.27]    [Pg.27]    [Pg.245]    [Pg.191]    [Pg.173]    [Pg.110]    [Pg.216]    [Pg.1335]    [Pg.1219]    [Pg.58]    [Pg.337]    [Pg.296]   
See also in sourсe #XX -- [ Pg.27 , Pg.28 , Pg.165 , Pg.219 ]




SEARCH



Acid Halides to Esters

Acid halides

Acid halides reactions with esters

Acidic halides

Carboxylic acid esters from halides

Chloroformic acid esters halides

Dicarboxylic acid esters halides

Enol esters acid halide synthesis

Ester from acid halides

Halides and Esters Derived from Orthovanadic Acid

Halides carboxylic acid esters

Halides esters

Halides methanesulfonic acid ester

Halides nitric acid esters

Halides perchloric acid esters

Halides phosphinic acid esters

Halides phosphonic acid ester

Halides phosphoric acid ester

Halides sulfonic acid esters

Halogenocarboxylic acid esters halides

Hydroxamic acid esters halides

Ketocarboxylic acid esters halides

Phosphoramidic acid, N- diethyl ester reaction with alkyl halides

Selenous acid ester halides

Selenous acid ester halides esters

Sulfurous acid ester halides

Trimethylsilyl esters acid halide synthesis

© 2026 chempedia.info