HYDROXYPROPYL

Fluoro-3-iodopyridine 212 was used by Comins and Saha as the starting material in a synthesis of mappicine. The first-formed organolithium 213 rearranges to 214 and a quench gives 215. Iodine-lithium exchange allows introduction of the C-4 hydroxypropyl substituent of 216 (Scheme 104). 

Cocodimonium hydroxypropyl hydrolyzed collagen Cocodimonium hydroxypropyl hydrolyzed hair keratin Cocodimonium hydroxypropyl hydrolyzed keratin Cocodimonium hydroxypropyl hydrolyzed rice protein Cocodimonium hydroxypropyl hydrolyzed silk Cocodimonium hydroxypropyl hydrolyzed soy protein Cocodimonium hydroxypropyl hydrolyzed wheat protein Cocodimonium hydroxypropyl silk amino acids Coco-ethyidimonium ethosulfate Coco-hydroxysultaine Coco-morpholine oxide Coco/oleamidopropyl betaine Cocotrimonium chloride Cocoyl benzyl hydroxyethyl imidazolinium chloride Cocoyl hydrolyzed collagen Cocoyl hydrolyzed keratin Cocoyl hydrolyzed soy protein Cocoyl polyglyceryl-4 hydroxypropyl dihydroxyethylamine Com (Zea mays) oil Corn starch/acrylamide/sodium acrylate copolymer Cyclomethicone L-Cysteine L-Cystine DEA-lauraminopropionate DEA-oleth-3 phosphate DEA-oleth-10 phosphate Decarboxy carnosine HCI Decylamine oxide Decyl betaine Dibehenyidimonium chloride Dibehenyldimonium methosulfate Dibehenyl methylamine... 

Styrenated diphenylamine Vulkanox DDA Vulkanox DDA-EM50 Wingstay 29 68442-94-4 Hydroxypropyl guar 68444-33-7 Standamul GTO-26 Undecylpentadecanol... 

Lignosulfonates are polymers containing 4-hydroxypropyl-2-methoxyphenol and 4-hydroxypropyl-2,6-dimethoxyphenol repeating units, approximately half of which have undergone alkyl chain sulfonation. The repeating unit is taken as about 223 daltons. 

The use of hydroxyethyl (also hydroxypropyl) methacrylate as a monomer permits the introduction of reactive hydroxyl groups into the copolymers. This offers the possibility for subsequent cross-linking with an HO-reactive difunctional agent (diisocyanate, diepoxide, or melamine-formaldehyde resin). Hydroxyl groups promote adhesion to polar substrates. 

Limitations with the chiral selectivity of the native cyclodextrins fostered the development of various functionalized cyclodextrin-based chiral stationary phases, including acetylated (82,83), sulfated (84), 2-hydroxypropyl (85), 3,5-dimethylphenylcarbamoylated (86) and... 

The derivatives are hydroxyethyl and hydroxypropyl cellulose. AH four derivatives find numerous appHcations and there are other reactants that can be added to ceUulose, including the mixed addition of reactants lea ding to adducts of commercial significance. In the commercial production of mixed ethers there are economic factors to consider that include the efficiency of adduct additions (ca 40%), waste product disposal, and the method of product recovery and drying on a commercial scale. The products produced by equation 2 require heat and produce NaCl, a corrosive by-product, with each mole of adduct added. These products are produced by a paste process and require corrosion-resistant production units. The oxirane additions (eq. 3) are exothermic, and with the explosive nature of the oxiranes, require a dispersion diluent in their synthesis (see Cellulose ethers). 

Hydroxyethyi and 2-hydroxypropyl acrylates are prepared by the addition of ethylene oxide or propylene oxide to acryhc acid (104,105). 

Selected physical properties of various methacrylate esters, amides, and derivatives are given in Tables 1—4. Tables 3 and 4 describe more commercially available methacrylic acid derivatives. A2eotrope data for MMA are shown in Table 5 (8). The solubiUty of MMA in water at 25°C is 1.5%. Water solubiUty of longer alkyl methacrylates ranges from slight to insoluble. Some functionalized esters such as 2-dimethylaniinoethyl methacrylate are miscible and/or hydrolyze. The solubiUty of 2-hydroxypropyl methacrylate in water at 25°C is 13%. Vapor—Hquid equiUbrium (VLE) data have been pubHshed on methanol, methyl methacrylate, and methacrylic acid pairs (9), as have solubiUty data for this ternary system (10). VLE data are also available for methyl methacrylate, methacrylic acid, methyl a-hydroxyisobutyrate, methanol, and water, which are the critical components obtained in the commercially important acetone cyanohydrin route to methyl methacrylate (11). 

A ceUulose ether thickener such as hydroxypropyl methylceUulose can be added to thicken a methylene chloride remover. Removers that are acid or alkaline activated requite thickeners that wid not be hydroly2ed by the acid or the base. 

Guar gum is a nonionic, branched-chain polysaccharide, a galactomaiman that is usually hydroxypropylated for use in drilling (52). It produces viscous solutions in fresh or salt water at concentrations of ca 3—6 kg/m (1—2 lb /bbl). It is used in soHds-free and low soflds muds and degrades rapidly above 80°C, limiting its use to shallow wells. 

Under alkaline conditions, an amine addition reaction can occur. For example, in the reaction of C3H3CH2CH2NH2 and aEyl alcohol in the presence of sodium alcoholate at 108°C for 80 h, 43.4% A/-(3-hydroxypropyl)phenylethylamine is formed (12). 

A/-(2-hydroxypropyl)-dodecanamide [142-54-1] Ninol AD31 Stepan flakes... 

Ethoxylation and Propoxylation. Ethylene oxide [75-21-8] or propylene oxide [75-56-9] add readily to primary fatty amines to form bis(2-hydroxyethyl) or bis(2-hydroxypropyl) tertiary amines secondary amines also react with ethylene or propylene oxide to form 2-hydroxyalkyl tertiary amines (1,3,7,33—36). The initial addition is completed at approximately 170°C. Additional ethylene or propylene oxide can be added by using a basic catalyst, usually sodium or potassium hydroxide. 

The addition of a 3-hydroxypropyl group to the 7 -position of fortimicin A caused a significant reduction in antibacterial activity (237). 

Hydrogen Sulfide andMercaptans. Hydrogen sulfide and propylene oxide react to produce l-mercapto-2-propanol and bis(2-hydroxypropyl) sulfide (69,70). Reaction of the epoxide with mercaptans yields 1-aLkylthio- or l-arylthio-2-propanol when basic catalysis is used (71). Acid catalysts produce a mixture of primary and secondary hydroxy products, but ia low yield (72). Suitable catalysts iaclude sodium hydroxide, sodium salts of the mercaptan, tetraaLkylammonium hydroxide, acidic 2eohtes, and sodium salts of an alkoxylated alcohol or mercaptan (26,69,70,73,74). 

In industrial production of acid-modified starches, a 40% slurry of normal com starch or waxy maize starch is acidified with hydrochloric or sulfuric acid at 25—55°C. Reaction time is controlled by measuring loss of viscosity and may vary from 6 to 24 hs. For product reproducibiUty, it is necessary to strictly control the type of starch, its concentration, the type of acid and its concentration, the temperature, and time of reaction. Viscosity is plotted versus time, and when the desired amount of thinning is attained the mixture is neutralized with soda ash or dilute sodium hydroxide. The acid-modified starch is then filtered and dried. If the starch is washed with a nonaqueous solvent (89), gelling time is reduced, but such drying is seldom used. Acid treatment may be used in conjunction with preparation of starch ethers (90), cationic starches, or cross-linked starches. Acid treatment of 34 different rice starches has been reported (91), as well as acidic hydrolysis of wheat and com starches followed by hydroxypropylation for the purpose of preparing thin-hoiling and nongelling adhesives (92). 

L-pyrenyldiazomethane to form stable, highly fluorescent L-pyrenyhnethyl monoesters (87). These esters have been analy2ed in human blood by ce combined with lif detection. To mimini e solute adsorption to the capillary wall, they were coated with polyacrjiamide, and hydroxypropyl methylceUulose and dimethylfoTTnamide were used as buffer additives to achieve reflable separations. Separation was performed in tris-citrate buffer, pH 6.4, under reversed polarity conditions. The assay was linear for semm MMA concentrations in the range of 0.1—200 p.mol/L. 

Cationic poly(vinyl alcohol) has been prepared by the reaction of A/-(3-chloro-2-hydroxypropyl)-Ai,Ai,A/-trimethylammonium chloride, PVA, and sodium hydroxide (143). Reactions between alkyUdene epoxide and PVA in particulate, free-flowing form in an alkaline environment have been reported (144). 

Etherification. Carbohydrates are involved in ether formation, both intramoleculady and intermoleculady (1,13). The cycHc ether, 1,4-sorbitan, an 1,4-anhydroalditol, has already been mentioned. 3,6-Anhydro-a-D-galactopyranosyl units are principal monomer units of the carrageenans. Methyl, ethyl, carboxymethyl, hydroxyethyl, and hydroxypropyl ethers of cellulose (qv) are all commercial materials. The principal starch ethers are the hydroxyethyl and hydroxypropylethers (see Cellulose ethers Starch). 

MethylceUulose is made by reaction of alkaU ceUulose with methyl chloride until the DS reaches 1.1—2.2. HydroxypropyhnethylceUulose [9004-65-3], the most common of this family of products, is made by using propylene oxide in addition to methyl chloride in the reaction MS values of the hydroxypropyl group in commercial products are 0.02—0.3. Use of 1,2-butylene oxide in the alkylation reaction mixture gives hydroxybutyhnethylceUulose [9041-56-9, 37228-15-2] (MS 0.04—0.11). HydroxyethyhnethylceUulose [903242-2] is made with ethylene oxide in the reaction mixture. 

The abihty to moisturize the stratum corneum has also been claimed for the presence of certain hydrophilic polymers, for example, guar hydroxypropyl trimonium chloride [65497-29-2] on the skin. By far the most popular way to moisturize skin is with humectants, some of which are Hsted in Table 12. It is claimed that humectants attract water from the environment and thereby provide moisture to the skin. 

---