Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Atterberg

Atterberg-limit tests determine the water content influence in defining liquid, plastic, semisolid and solid states of fine-grained soils. Permeability tests may be carried out in the laboratory or in the field. Such tests are used to determine the hydraulic conductivity coefficient k. ... [Pg.275]

M. Berthelot. found that many nitrogenous organic compounds furnish ammonia when heated with hydriodic acid and J. Kjeldahl showed that the nitrogen of many nitrogenous compounds is all converted into ammonia or ammonium sulphate when heated with cone, sulphuric acid—in the case of nitro-eompounds and cyanides the reaction is not always quantitative. The reaction proceeds more satisfactorily in the presence of mercury or mercuric oxide, copper, potassium hydrosulphate, sugar, phenol, benzoic acid, and analogous compounds. This reaction has been discussed by C. Arnold, A. Atterberg, C. Budde and C. V. Sehon,... [Pg.165]

A group of (originally) seven limits of soil consistency, or relative ease with which material can be deformed or made to flow. The only Atterberg limits that are still in common use are the liquid limit, plastic limit, and plasticity number. [Pg.360]

The class of methods used for preparing colloidal dispersions in which precipitation from either solution or chemical reaction is used to create colloidal species. The colloidal species are built up by deposition on nuclei that may be of the same or different chemical species. If the nuclei are of the same chemical species, the process is referred to as homogeneous nucleation if the nuclei are of different chemical species, the process is referred to as heterogeneous nucleation. See also Dispersion Methods. An empirical or qualitative term referring to the relative ease with which a material can be deformed or made to flow. It is a reflection of the cohesive and adhesive forces in a mixture or dispersion. See also Atterberg Limits. [Pg.365]

Suspension films separating two solid surfaces, and Wetting films separating a solid or liquid from a vapour. The minimum water content for which a small sample of soil or similar material will barely flow in a standardized test method. Also termed the upper plastic limit . See also Atterberg Limits, Plastic Limit, Plasticity Number. Light non-aqueous phase liquid. See Non-aqueous Phase Liquid. [Pg.381]

The difference between the liquid limit and the plasticity limit of a soil or similar material. Also termed the plasticity index . See also Atterberg Limits, Liquid Limit, Plastic Limit. [Pg.387]

Krumbein s zeta scale is especially applicable to Atterberg s system of classification. The diameter of a particle expressed in mm is denoted by the expression... [Pg.94]

The Atterberg classification and zeta scale are shown in Table 10. [Pg.94]

Atterberg (1911-1912) developed an apparatus shown in Figure 97 for the determination of soil cohesion. This apparatus depends on the... [Pg.354]

Figure 97. Atterberg s Apparatus for Determination of Soil Cohesion. Figure 97. Atterberg s Apparatus for Determination of Soil Cohesion.
The components of soils and rocks have different size, shape, and quality. The particle size of organic components usually is in the colloid range (<500 nm) mineral components have different dispersity. The first classification system of soils on the basis of particle size was done by Atterberg (1905). Practically, this classification has been used until now, though some countries have their own classifications, considering their widespread soil types. The size of soil particles will also determine how the soil fraction is named (e.g., clay, sand, silt, rock, etc.). Table 1.6 provides these names along with the standard diameter of the particles for the international classification system. [Pg.13]

Atterberg, A. 1905. Die rationalle Klassifikation der Sande und Kiese. Chemiker Zeitung 29 195-198. [Pg.75]


See other pages where Atterberg is mentioned: [Pg.368]    [Pg.400]    [Pg.405]    [Pg.414]    [Pg.418]    [Pg.106]    [Pg.170]    [Pg.207]    [Pg.195]    [Pg.325]    [Pg.41]    [Pg.172]    [Pg.878]    [Pg.879]    [Pg.77]    [Pg.234]    [Pg.360]    [Pg.142]    [Pg.191]    [Pg.7]    [Pg.93]    [Pg.93]    [Pg.93]    [Pg.94]    [Pg.94]    [Pg.94]    [Pg.354]    [Pg.355]    [Pg.497]    [Pg.545]    [Pg.14]    [Pg.149]    [Pg.186]    [Pg.186]    [Pg.241]   


SEARCH



Atterberg indices

Atterberg limits

Atterberg soil classification

© 2026 chempedia.info