Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Atterberg soil classification

Atterberg limits Liquid limit Plastic limit Shrinkage limit Soil classification, preliminary indication of behavior such as sensitivity of clays to loss of strength on remolding, and estimate of compressibility of "normally loaded" clays... [Pg.29]

Evaluate., sieve analysis and Atterberg limits test results for the purpose of soil classification. (4)... [Pg.55]

Soil classification particle grain size distribution, hydrometer, Atterberg limits, field identification tests, linear shrinkage and moisture content test ... [Pg.141]

The usual methods of soil classification, involving grain-size distribution and Atterberg limits, should be performed on laterites or suspected laterites that are anticipated for use as fill material. Because some particles of laterite crush easily, the more the material is handled, the finer the aggregates become. [Pg.384]

The components of soils and rocks have different size, shape, and quality. The particle size of organic components usually is in the colloid range (<500 nm) mineral components have different dispersity. The first classification system of soils on the basis of particle size was done by Atterberg (1905). Practically, this classification has been used until now, though some countries have their own classifications, considering their widespread soil types. The size of soil particles will also determine how the soil fraction is named (e.g., clay, sand, silt, rock, etc.). Table 1.6 provides these names along with the standard diameter of the particles for the international classification system. [Pg.13]

Soil characteristics most used in engineering classification systems are particle size and consistency (Atterberg limits). These simple tests reflect the soil s physical properties, composition, moisture content, and so on. The information obtained by these tests enables an individual to assess the quality of a soil for construction or as a foundation. Several systems are in use in the United States and throughout the world, which have application in the... [Pg.234]

The Atterberg limits and plasticity index are used in several engineering classification systems to characterise the fine-grained fractions of soils and to specify the fine-grained fraction of construction materials. They are also used to correlate with compressibility, permeability, compactibility, shrinkage and shear strength. [Pg.11]

The values of these limits are used in various aspects. There is a close relationship between the limits and properties of a soil sueh as eompressibility, permeability and strength. Thus the Atterberg limits are not only used to identify the soil s classification, but it also allows for the use of empirieal correlations for some other engineering properties. Liquid limit test is to elassify soils and to find the plasticity index of soil because different soils have various plastie limits. The shrinkage limit is much less commonly used than the liquid and plastic limits. [Pg.63]

Atterberg (liquid and plastic) limit tests on cohesive soils for classification and correlation studies. Significant insight relative to strength and compressibility properties can be inferred from the natural water content and Atterberg limit test results. [Pg.174]

The only measures of soil properties used in the NCEER method are geological classifications, fines content (the fraction passing the 200 sieve) and the Atterberg limits. In one version of this method, these geological classification parameters have been correlated to the soil behaviour type indicated by the CRT this allows direct use of the method based on CPT data alone. [Pg.293]


See other pages where Atterberg soil classification is mentioned: [Pg.93]    [Pg.242]    [Pg.128]   
See also in sourсe #XX -- [ Pg.93 ]




SEARCH



Atterberg

© 2026 chempedia.info